Home

Remote Controlled Outlet Strip
Home
High-Level Design
Hardware Design
Software Design
Results
Conclusions
Pictures
Appendices

Daniel Warren

Heidi Ng

Radio Controlled 120V Outlet Strip

Our project is a remotely controlled outlet strip, to create simple light shows.  It was built with two microcontrollers on their own circuit boards, communicating over a 433MHz radio channel.  The receiver uses relays to switch the outlets on and off, as the user desires.  The relays we chose can only handle 2A each, but that's plenty for decorative and most desk or floor lamps.
 


Home | High-Level Design | Hardware Design | Software Design | Results | Conclusions | Pictures | Appendices

 ECE 476 Final Project
© Spring 2004 Daniel Warren and Heidi Ng
Problems? Questions?  Contact sleepdeprived@cornell.edu.
Last updated: 05/03/04.